What's new

JB4 & BMS Dual Catch Cans

I got the catch cans and installed them as well. If you run higher boost, I think they will be well worth it in the end. Just a little insurance for the engine. I came from owning a build mazdaspeed 6 and had catch cans on that. Emptied every 3,00 miles when i changed the oil, they were always full. The crap it kept out of my engine probably saved me from a new engine. Have not emptied out these yet, have gone about 2,000 miles so far.
 
I got the catch cans and installed them as well. If you run higher boost, I think they will be well worth it in the end. Just a little insurance for the engine. I came from owning a build mazdaspeed 6 and had catch cans on that. Emptied every 3,00 miles when i changed the oil, they were always full. The crap it kept out of my engine probably saved me from a new engine. Have not emptied out these yet, have gone about 2,000 miles so far.

Duals? Brand?
 
I got the catch cans and installed them as well. If you run higher boost, I think they will be well worth it in the end. Just a little insurance for the engine. I came from owning a build mazdaspeed 6 and had catch cans on that. Emptied every 3,00 miles when i changed the oil, they were always full. The crap it kept out of my engine probably saved me from a new engine. Have not emptied out these yet, have gone about 2,000 miles so far.
It’s more about keeping the intake valves from gunking up with caked on deposits with direct injection engines. The PCV cycles crankcase vapors into the intake and with no port injection, those valves will become caked up over time.
How easy is it to get to those cans to empty?
Also, I would look into emptying them sooner is they are more than 3/4 full. Don’t want that liquid being sucked down the intake! 😱
 
It’s more about keeping the intake valves from gunking up with caked on deposits with direct injection engines. The PCV cycles crankcase vapors into the intake and with no port injection, those valves will become caked up over time.
How easy is it to get to those cans to empty?
Also, I would look into emptying them sooner is they are more than 3/4 full. Don’t want that liquid being sucked down the intake! 😱

Yep, don't want to have to get walnut blasting done too soon..........
 
It’s more about keeping the intake valves from gunking up with caked on deposits with direct injection engines. The PCV cycles crankcase vapors into the intake and with no port injection, those valves will become caked up over time.
How easy is it to get to those cans to empty?
Also, I would look into emptying them sooner is they are more than 3/4 full. Don’t want that liquid being sucked down the intake! 😱
The cans are a kind of tight fit, so emptying them isn't going to be exactly easy, but it won't be impossible. I will probably loosen the bracket to give me a little extra clearance when it is time to empty them. So far, it seems like the CCV side is collecting all of the liquid. The PCV side is empty on mine, but it also hasn't been very long. We shall see, I guess.
 
I would think that having a drain plug on them would defiantly be a lot easier for draining. RJD
 
Looking at picture at 797 Performance, it appears there is a drain plug. Mybe tough to get to depending on fit but there.
Ya getting like the car companies never make any thing easy to get to. RJD
 
FWIW, IF I cared (I don't at all) about adding one IF I had a car that could use one...
I would install and set it up to drain to the oil pan automatically. I believe Ford made one like that for one of the Mustang Shelby Cobra cars? But since these all come with a great warranty, and catch cans (even auto-drain ones) are cheap compared to warranty claims, I would assume they would come with one from the factory if truly beneficial. I get it, with Direct Injection, you don't get intake cleaning action from the injectors. But hey, they sure don't harm anything. But again, I would setup a self drain to the pan type thing each shut down cycle.
 
Sounds like a great idea. But as you said and others have also including me that the factory should install bur apparently they are not to concerned about it. RJD
 
Sounds like a great idea. But as you said and others have also including me that the factory should install bur apparently they are not to concerned about it. RJD
Because it’s another maintenance item- the can has to be periodically emptied or it is overflows down the intake. How many people can follow basic maintenance like check oil, change oil, etc?
No manufacturer does an external catch can.
Most have recognized the problem and solve it through adding port injection along with direct.
 
📢 Support the above vendors that support this site!
To become a Supporting Vendor: ✉️ Message Dragoon

Trending Topics

Back
Top Bottom